50 Meter Simplex Fiber Cable SC APC to SC APC | Single Mode 3mm | Fiber Drop Cable 9/125um Fiber Patch Cord FTTH Drop Cable – Steel Wire Black LSZH Jacket
SC to SC 50 Meter Simplex Fiber Cable
50 Meter Simplex Fiber Cable SC APC to SC APC | Single Mode 3mm | Fiber Drop Cable 9/125um Fiber Patch Cord FTTH Drop Cable – Steel Wire Black LSZH Jacket
$ 9
SC to SC 50 Meter Simplex Fiber Cable
EXPERT FEATURES
- High Quality and Cost-Effective 9/125μm Single Mode Bend Insensitive Fiber Optic Cable
- This 9/125um (Micron) single mode fiber optic cable is ideal for connecting 1G/10G Ethernet connections, HDMI over Fiber Optic Extenders or from your Fiber Router for Fiber to the Home (FTTH).
- Use this cable to connect your Fiber Distribution box (Example below) for Fiber to the Home (FTTH) to the Fiber Modem / Router for your internet access.
- An easy method to change the location of your router to optimize Wifi Reception or accessibility.
6
People watching this product now!
Description
Additional information
| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
SHIPPING AND DELIVERY
Our delivery charges are calculated based on the distance between our warehouse and your location We strive to provide the best possible delivery experience for our customers and are committed to delivering your products as quickly and efficiently as possible If you have any questions or concerns regarding our delivery services, please feel free to contact us Our customer service team is always available to assist you and provide information or support you may need
Related products
24V (1A) 10/100 mbs PoE adapter, EU type plug
$ 5
This PoE injector is a simple and convenient power supply equipment for PoE or Non PoE devices via only an Ethernet cable, which will save your trouble about power line cabling and save cost.
- Power remote equipment through CAT 5 Ethernet cable up to 100M
- Autoranging switching power supply 100~240V AC
- Short circuit, over-current, and over-voltage protection
- Reliable 24W passive POE output
- Compact, portable size with convenient wall plug design
- 24V-1A Wall Plug POE Injector Ethernet Adapter IP Phone/Camera Power Supply
* The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.
Specification:
Input Voltage (AC): 100- 240Vac (nominal) Input Frequency Range: 47 Hz(min) ~ 63 Hz(max) Output Voltage (DC): 24 V (22.8-25.2) Output Rating: 1A (24W) Operating Temperature: -10°C ~ +40°C Storage Temperature: -30°C ~ +80°C Operating Humidity: 10%~95% non-condensing Storage Humidity: 10%~95% non-condensing Weight: 90 g Certification: CE
Connectors view:
BOSI BS433268 Modular Plug Crimper TOOL
Original price was: $ 10.$ 9Current price is: $ 9.
Gigabit Ethernet Fiber Media Converters, a pair of 10/100/1000M RJ45 to 1000M Bi-Directional Single-Mode SC Fiber
Original price was: $ 19.$ 16Current price is: $ 16.
- Optical Port: 1.25Gbps, 1310nm/1550nm, Single-Mode SC Optic Fiber UP TO 3K
- RJ45 Port: Auto-detective 10M/100M/1000Mbps Cat5 Cable
- Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
- Connect the power cord to the Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will turn on when all the cable connections satisfied
- What In Box: A pair of Ethernet Media Converter, 2x DC Power Adapter, 1x Product Manual.
GVISION 10/100/1000M Uplink Port switch poe support switch poe reverse and poe switch 8 port
$ 17
1*10/100/1000M Uplink Port switch poe support switch poe reverse and poe switch 8 port
PRODUCT INTRODUCTION:
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider.
This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).
This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
PRODUCT FEATURE:
REVERSE POE TECHNOLOGY:7Port 10/100+ 1G Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100/1000 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps (Up-link Port is 1000Mbps) and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps(Up-link Port is 2000Mbps)in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 30V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
PRODUCT APPLICATION:
7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100/1000 Base T Uplink Port & 12V DC Power out for Powering ONU
PRODUCT SPECIFICTAION:
| Product | RPOE 7*10/100M+1*1000M 12V2A out |
| Ethernet Connector | RJ45 Jacks(8 Ports)10/100Base-TX with Auto-MDIX |
| 1*10/100/1000M Base T Data Uplink Port(port 1) | |
| 7*10/100 Base-Reverse POE Ports(Port 2to 8)Data + Power in | |
| standards | IEEE STD. 802.3 10BASE T 10Mbps,Half/Full Duplex IEEE STD. 802.3U 100BASE-TX,10/100Mbps,Half/Full Duplex IEEE STD.802.3X FLOW CONTROL AND BACK PRESSURE IEEE STD.802.3AZ Energy Efficient Ethernet |
| Protocols | CSMA/CD |
| Transmission Method | Store and forward |
| MAC ADDRESS | Support 8k MAC address |
| Packet Buffer | |
| Maximum Forwarding Packet Length | Supports 9216-byte jumbo packet length forwarding at wire speed |
| Filtering/Forwarding Rates | 1000Mbps Port – 148800pps 100Mbps Port – 14880pps 10Mbps Port – 14880pps |
| Network Cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for switch |
| Power Over Ethernet injector: Power Supply(IN) | Power over Ethernet 24V @ 18W on SPARE pair ( to supply power to the HDV switch as well as a compatible POE device(e.g. CPE) |
| No. of Ethernet Ports that can Power On the Switch & ONU | Any one /all of the seven Downlink Ports |
| Power Over Ethernet | Power over Ethernet injector on Four Pair Cable |
| DC Out | 12V/2A DC OUT THROUGH DC jack for powering other Device like ONU |
| Ethernet Devices that can be powered | Single |
| CAT-5 Cable Date Lines | Pair 1:Pins 1/2,Pair 2:Pins3/6 |
| CAT-5 Cable Power Lines | +VDC: Pins 4/5,-VDC:Pins 7/8 |
| Power consumption | 5 Watt (Poe injector) / 2 Watt (Switch) |
| Operating Temperature | 0℃to 50℃ |
| Storage environment | 0℃ to 75℃ |
| Operating Humidity | 20% to 95% (non-condensing) |
| Dimension of Switch | 125mm*70mm*25mm |
| Weight of Switch | 0.45KG |
TPLINK 300Mbps ADSL2+ Modem Router TD-W8961ND
Original price was: $ 20.$ 19Current price is: $ 19.
- ADSL 2/2+ Modem, Wireless N Access Point and 4-Port Router, in a single device
- Wireless N speed up to 300Mbps makes it ideal for heavy bandwidth consuming or interruption sensitive applications like online gaming, Internet calls and even HD video streaming
- Easy Setup Assistant with multi-language support provides quick & hassle-free installation
- Easy one-touch wireless security encryption with the"WPS" button and Easy Wi-Fi On/Off button
TPLINK RE650 AC2600 WI-FI RANGE EXTENDER
Original price was: $ 106.$ 95Current price is: $ 95.
- Superior Extended Range – Four fixed external antennas extend Wi-Fi coverage*
- 4-Stream for AC2600 Dual Band Wi-Fi – Simultaneous 800Mbps on 2.4GHz + 1733Mbps on 5GHz
- 4×4 MU-MIMO** – Simultaneously transfers data to multiple devices for 4x faster performance
- Beamforming Technology – Send targeted Wi-Fi signal to individual devices for stronger connections
- Gigabit Ethernet Port – Provide faster wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point***