| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
ASUS PRIME H610-R D4-SI DDR4 MOTHERBOARD
$ 103
90MB1B40-M0ECY0
ASUS PRIME H610-R D4-SI DDR4 MOTHERBOARD
Intel® H610 (LGA 1700) mic-ATX motherboard with DDR4, PCIe 4.0, M.2 slot, Realtek 1 Gb Ethernet, HDMI®,D-Sub, DVI, USB 3.2 Gen 1 ports, SATA 6 Gbps , COM header, LPT header, TPM header
- Intel® LGA 1700 socket: Ready for 12th Gen Intel® processors
- Comprehensive cooling: PCH heatsink
- Ultrafast connectivity: 32Gbps M.2 slot, Realtek 1 Gb Ethernet and USB 3.2 Gen 1
- 5X Protection III: Multiple hardware safeguards for all-round protection
Processor
| Processor manufacturer | Intel |
|---|---|
| Processor socket | LGA 1700 |
| Compatible processor series | Intel® Celeron®, Intel® Core™ i3, Intel® Core™ i5, Intel® Core™ i7, Intel® Core™ i9, Intel Pentium G |
| Supported processor sockets | LGA 1700 |
Memory
| Supported memory types | DDR4-SDRAM |
|---|---|
| Number of memory slots | 2 |
| Maximum internal memory | 64 GB |
| Memory slots type | DIMM |
| Memory channels | Dual-channel |
| Non-ECC | – |
| Supported memory clock speeds | 2133,2400,2666,2800,2933,3000,3200 MHz |
| Unbuffered memory | – |
Storage controllers
| Supported storage drive interfaces | M.2, SATA III |
|---|---|
| Supported storage drive types | HDD & SSD |
| Number of storage drives supported | 5 |
Graphics
| Parallel processing technology support | Not supported |
|---|---|
| Maximum resolution | 3840 x 2160 pixels |
15
People watching this product now!
Additional information
SHIPPING AND DELIVERY
Our delivery charges are calculated based on the distance between our warehouse and your location We strive to provide the best possible delivery experience for our customers and are committed to delivering your products as quickly and efficiently as possible If you have any questions or concerns regarding our delivery services, please feel free to contact us Our customer service team is always available to assist you and provide information or support you may need
Related products
1850W ATX Modular Mining PC Power Supply 6 GPU
Original price was: $ 139.$ 127Current price is: $ 127.
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC
INTERFACE
20+4P *1
CPU 4+4P *1
6+2P* 12
IDE* 5
SATA *8
Features:
1.Support 6 pieces graphics card(Power is lower than 1800W)
2.1800W power supply, high efficiency,very quiet,stable performance.
3.With new big capacitor and big magnetic ring material, the performance is very stable.
4:with one year warrety
Package :
1800w psu *1
power tester *1
power cord *1
Please pay attention :
1: this psu is design forminer Mining,it can be used in normal computer but it will a little noisy when you use in normal computer , if you want a very quiet computer psu , do not buy this one and contact our sales to advise you one .
BIOSTAR PCIe X1 USB 3.0 Crypto Mining Expansion Card
$ 22
Product Overview Gaming in the Virtual Life & Mining in the Real World
Have you ever thought about the possibility to turn your gaming motherboard into a crypto mining base? Gaming and mining make you get achievements both in the virtual life and in the real world. The BIOSTAR Crypto Mining Card is designed for graphics card expansion to fully convert your gaming PC to a professional cryptocurrency mining rig that can handle much more graphics cards than those it could be equipped with.
Turn Your Gaming Motherboard into a Mining Base
The Crypto Mining Card with PCI-e x1 to 4 USB3.0 connectors is exclusively compatible with all BIOSTAR mining motherboards*, and select BIOSTAR gaming motherboards* and including the specific motherboards as following: RACING H170GT3, GAMING H170T, Hi-Fi H170S3H, Hi-Fi B150S1, Hi-Fi B150S1 D4, and TB150 PRO. To increase the mining profitability, this Crypto Mining Card can let mining enthusiasts set up their mining machine up to 8 slots for TB150 PRO to utilize more GPUs for more mining power**. Moreover, it can return your investment on your system by giving you the flexibility to create a mining rig to generate income from mining popular cryptocurrency like Bitcoin, Ethereum or Zcash.
Maximum Total Graphics Cards for Mining When Used Inconjunction with the Crypto Mining Card:
• Racing H170GT3 + Crypto Mining Card = Up to 7 Graphics Cards.
• GAMING H170T + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi H170S3H + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi B150S1 + Crypto Mining Card = Up to 6 Graphics Cards.
• Hi-Fi B150S104 + Crypto Mining Card = Up to 6 Graphics Cards.
• TB150 PRO + Crypto Mining Card = Up to 8 Graphics Cards. Features • BIOSTAR Crypto Mining Card turns you gaming machine crypto currency mining system, or expands your existing mining setup.
• Exclusively compatible with all BIOSTAR Mining Motherboards* & select BIOSTAR Gaming Motherboards*.
• Converts one PCIe x1 slot into four USB 3.0 PCIe connectors, so you can connect up to four USB PCIe riser cards**.
• Gives you the flexibility to use existing hardware to start Crypto mining, or increase the number of graphics cards in your current mining rig for maximum profitability.
• Powered by 1x 4-pin Molex Peripheral Connector.
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
Original price was: $ 8.$ 5Current price is: $ 5.
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
NZXT AER RGB 120MM FAN AR120-B1
$ 27
These RGB case fans deliver optimal airflow and advanced lighting effects powered by NZXT CAM.
- Connect up to five fans per channel
- Mix-and-match with any RGB Lighting & Fan Control accessory*
- NZXT CAM-powered for seamless software control and nearly infinite customization
- Uniquely shaped, custom engineered light guide creates stunning visual effects with uniform light dispersion
- Daisy chain and group fans together for additional lighting effects
- PWM fan with optimized cooling and whisper-low 22 dBA
- Fluid dynamic bearing engineered to last over six years
Have questions?
NZXT Kraken X53 RGB 240mm – – AIO RGB CPU Liquid
$ 175
From the manufacturer
KRAKEN X-3 RGB SERIES
LIQUID COOLER WITH RGB FANS
With the addition of NZXT RGB fans, the Kraken X-3 RGB is a stunning must-have for any build. With a re-designed cap and larger infinity mirror ring LED, the Kraken X delivers an amazing experience in luminous liquid cooling.
- 10% bigger LED ring and rotatable logo
- Sophisticated CAM interface with precise control
- Included RGB fans for quiet fan operation
- Durable tubing and easy installation
|
|
|
|---|---|---|
BIGGER AND BRIGHTERA 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed. |
BETTER CONTROLCAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button. |
VIVID AND SILENTDramatic lighting effects complement your system with the addition of included Aer RGB 2 fans. Fans feature a winglet-tip fan blade design producing optimal airflow while keeping the fans as quiet as possible. Fluid dynamic bearings in every fan provide long-lasting, near-silent operation. |
Thermal Grizzly Hydronaut High Performance Thermal Paste – 1 GRAM
$ 10
Thermal Grizzly Hydronaut Thermal Paste 1 Gram Model TG-H-001-RS
Features:
Hydronaut can be used for overclocking due to it’s excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
suited for Overclocking
excellent thermal conductivity
no curing
silicone-free
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 11,8 W/mk
Thermal Resistance 0,0076 K/W
Electrical Conductivity 0 pS/m
Viscosity 140-190 Pas
Speific Weight 2,6g/cm3
Temperature -200 °C / +350 °C
Capacity 1,5ml / 3,9g – 3ml / 7,8g
Thermal Grizzly Hydronaut Thermal Paste 1.5 ml 3.9 GRAM
$ 16
Thermal Grizzly Hydronaut 1.5ml / 3.9g Thermal Paste Model TG-H-015-R
Features:
Hydronaut can be used for overclocking due to it’s excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
suited for Overclocking
excellent thermal conductivity
no curing
silicone-free
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 11,8 W/mk
Thermal Resistance 0,0076 K/W
Electrical Conductivity 0 pS/m
Viscosity 140-190 Pas
Speific Weight 2,6g/cm3
Temperature -200 °C / +350 °C
Capacity 1,5ml / 3,9g – 3ml / 7,8g
Thermal Grizzly Minus Pad 8 Thermal Pad, 120 × 20 × 0.5 mm, 2-Pack
Original price was: $ 16.$ 15Current price is: $ 15.
Thermal Grizzly Minus Pad 8 Thermal Pad 120x20mmx1mm Model TG-MP8-120-20-05-2R
Features:
The high performance thermal pads of the Thermal Grizzly Minus Pad series consist of a very elastic and flexible surface area with very high thermal conductivity, compensating for even the smallest of gaps between components. Available in a variety of different sizes and thicknesses.
High thermal conductivity
High compressibility
Electrical insulation
Specs:
Specifications minus pad 8: W/mK 8.0, temperature range: -100°C / +250°C
The minus pads 8 are available in the sizes of 30x30mm, 120x20mm, 100x100mm as well as in the thicknesses of 0,5mm, 1mm, 1,5mm, 2mm.