VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Cooler Master 1000W FullModular 80+ Platinum Certified
$ 267
ooler Master V1000 Platinum 1000W Full-Modular, 80 PLUS Platinum, Japanese Capacitors, Single/Multi Rail Switch
Thermal Regulation Mode
Thermal Regulation Mode keeps the V Platinum quiet and stable by maintaining a constant fan speed up to 60% of the maximum load. Once this threshold is breached, the system will increase the fan’s rotation accordingly based on the thermal requirements of the current load. This system increases the lifespan of the power supply unit by keeping the fan under minimal stress without risking the safety or performance of the PSU or the system as a whole.
Single/multi-rail Switch
The built in rail switch allows you to alter the PSU from single to multiple rails in order to tailor the unit’s performance to your needs. Use multi-rail mode for normal use and single rail mode for specialized needs such as overclocking. Change modes with the flick of a switch.
Improved Pci-e Cable Conductivity
The V Platinum series comes with 16AWG PCI-e cables. These are thicker than current industry standard 18AWG cables, meaning less heat resistance during use. The reduction in heat resistance improves efficiency and stability so your components can get the most out of that 80 PLUS Platinum rating. As an added bonus, the lower resistance means less ambient heat in your case being expelled from your cables, making your entire system safer and cooler than the same setup with standard issue cables
Double Ball Fan Bearing
In order to meet the highest performance demands, the V Platinum’s 135mm fan uses a double ball bearing. Though rarely used in power supply units, this special fan bearing can operate safely and reliably in temperatures up to 70°C. This considerably high safe maximum temperature allows users to safely conduct stressful operations such as mining and overclocking without having to worry about their PSU fan failing.
PSU Calculator
Need help choosing the right power supply for your system?
Try out our to use, comprehensive PSU calculator.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Related products
1850W ATX Modular Mining PC Power Supply 6 GPU
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC
BIOSTAR GAMING BOARD H510MH
H510MH/E 2.0 Ver. 6.0
Socket : 1200
- Supports 10th/11th Generation Intel Core™ Processor
- Intel H510 single chip architecture
- Supports 2-DIMM DDR4- 3200/ 2933/ 2666/ 2400/2133/ 1866 up to 64 GB Memory
- Supports PCIe 4.0
- Supports PCIe M.2 3.0 (32Gb/s)
- Supports USB 3.2 Gen1
- Supports WiFi 6 module (No WiFi 6 card included)
-
CPU SUPPORT Support for 10th/ 11th Generation Intel Core i9/ i7/ i5/ i3 processors and Intel Pentium processors/ Intel Celeron processors in the LGA1200 package * Please refer to www.biostar.com.tw for CPU support list. MEMORY Supports Dual Channel DDR4 3200/ 2933/ 2666/ 2400/ 2133/ 1866 2 x DDR4 DIMM Memory Slot, Max. Supports up to 64 GB Memory Each DIMM supports non-ECC 4/8/16/32GB DDR4 module * Please refer to www.biostar.com.tw for Memory support list. INTEGRATED VIDEO By CPU model Supports DX12 Supports HDCP Supports HDMI 1.4 version STORAGE -- Total supports 1 x M.2 socket and 4 x SATA III (6Gb/s) ports 4 x SATA III Connectors (6Gb/s) 1 x M.2 (M Key) Socket: Supports M.2 Type 2242/ 2260/ 2280 SSD module. Supports PCIe 3.0 x4 (32Gb/s) - NVMe/ AHCI SSD & SATA III (6Gb/s) SSD * When using SATA SSD module on M.2 slot (M2_PCIEG3_32G_SATA_1), the SATA_1 connector will be disabled. LAN Intel I219V 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability AUDIO CODEC ALC897 7.1 Channels, High Definition Audio USB 4 x USB 3.2(Gen1) ports (2 on rear I/Os and 2 via internal headers) 8 x USB 2.0 ports (4 on rear I/Os and 4 via internal headers) EXPANSION SLOT 1 x PCIe 3.0 x1 Slot 1 x PCIe 3.0/ 4.0 x16 Slot (x16 mode) * The PCIe 4.0 only depends on Rocket Lake CPUs. REAR I/O 2 x WIFI Antenna Ports 1 x PS/2 Keyboard / Mouse 1 x HDMI Port 1 x VGA Port 2 x USB 3.2 (Gen1) Ports 4 x USB 2.0 Port 1 x LAN port 3 x Audio Jack INTERNAL I/O 4 x SATA III Connectors (6Gb/s) 1 x M.2 (E Key) Socket : Supports 2230 type Wi-Fi & Bluetooth module and Intel CNVi 2 x USB 2.0 Header (each header supports 2 USB 2.0 ports) 1 x USB 3.2 (Gen1) Header (each header supports 2 USB 3.2 (Gen1) ports) 1 x 8-Pin Power Connector 1 x 24-Pin Power Connector 1 x CPU Fan Connector 1 x System Fan Connector 1 x Front Panel Header 1 x Front Audio Header 1 x Internal Stereo Speaker Header 1 x Clear CMOS Header 1 x COM Port Header * M.2 (E key) Wi-Fi card is not provided H/W MONITORING CPU / System Temperature Monitoring CPU / System Fan Monitoring Smart / Manual CPU Fan Control System Voltage Monitoring DIMENSION Micro ATX Form Factor Dimension: 20.8 cm x 23.6 cm ( W x L ) OS SUPPORT Supports Windows 10(64bit) ※Biostar reserves the right to add or remove support for any OS with or without notice. BUNDLE SOFTWARE BullGuard ACCESSORIES 2 x SATA Cable 1 x I/O Shield 1 x DVD Driver 1 x Quick Guide 1 x WiFi accessories FEATURES BIOS-Flasher
Cooler Master MasterLiquid ML120L V2 RGB Liquid Cooler
Kingston 960GB A400 SATA3 2.5″ SSD SA400S37/960G
NZXT AER RGB 120MM FAN AR120-B1
- Connect up to five fans per channel
- Mix-and-match with any RGB Lighting & Fan Control accessory*
- NZXT CAM-powered for seamless software control and nearly infinite customization
- Uniquely shaped, custom engineered light guide creates stunning visual effects with uniform light dispersion
- Daisy chain and group fans together for additional lighting effects
- PWM fan with optimized cooling and whisper-low 22 dBA
- Fluid dynamic bearing engineered to last over six years
Have questions?
Thermal Grizzly Minus Pad 8 Thermal Pad, 120 × 20 × 0.5 mm, 2-Pack
Thermal Grizzly TG-C-001-R – Conductonaut Liquid Metal Thermal Paste – 1 GRAM
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
INPUT
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
OUTPUT
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
BATTERY
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
Real Panel
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |