PSU Gold Fully Modular 80+ 1050W
Cooler Master MWE Gold 1050 V2 ATX3.0 Fully Modular, 1050W, 80+ Gold Efficiency, Quiet 140mm FDB Fan, 2 EPS Connectors, High Temperature Resilience
$ 219
PSU Gold Fully Modular 80+ 1050W
Model Name | MWE Gold 1050 |
Brand | Cooler Master |
Compatible Devices | Personal Computer |
Connector Type | EPS |
Output Wattage | 600 Watts |
Wattage | 600 watts |
Cooling Method | Air |
Item Dimensions LxWxH | 7.09 x 5.91 x 3.39 inches |
Item Weight | 7.85 Pounds |
Power Supply Design | Full Modular |
PSU Gold Fully Modular 80+ 1050W
Cooler Master MWE Gold 1050 V2 ATX3.0 Fully Modular, 1050W, 80+ Gold Efficiency, Quiet 140mm FDB Fan, 2 EPS Connectors, High Temperature Resilience
VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Get your notebook or small form factor machine fully equipped with HyperX Impact DDR4 SODIMM and minimize system lag. Ready for AMD Ryzen and Intel XMP-ready in capacities up to 64GB, Plug N Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz¹, to support Intel and AMD’s latest CPU technologies. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run cool, quiet, and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage.
1.HyperX Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. HyperX Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
WhatsApp us