DEEPCOOL 3 FANS 120mm ARGB WHITE
DEEPCOOL CF120 Plus 3 FANS x120mm PWM Fan , ARGB Dual Loop Lighting Zones, High Airflow and Low-Noise, 3-Pin (+5V-D-G) Addressable RGB LED Lighting – WHITE
$ 37
DEEPCOOL 3 FANS 120mm ARGB WHITE
| Brand | DeepCool |
| Power Connector Type | 3-Pin |
| Voltage | 5 Volts |
| Wattage | 2.16 watts |
| Cooling Method | Fan |
| Noise Level | 28.8 dB |
| Maximum Rotational Speed | 1800 RPM |









Fan Dimension |
120×120×26.5 mm(L×W×H) |
| Net Weight | 569g |
| FAN Speed | 500~1800 RPM±10% |
| Fan Air Flow | 52.5 CFM |
| Fan Air Pressure | 2.08 mmAq |
| Fan Noise Level | ≤28.8 dB(A) |
| Fan Connector | 4-Pin PWM |
| FAN Rated Voltage | 12VDC |
| FAN Rated Current | 0.18A |
FAN Power Consumption |
2.16W |
| LED Type | Addressable RGB LED |
| LED Rated Voltage | 5VDC |
| LED Rated Current | 0.63A |
| LED Rated Power | 3.15W |
| LED Connector | 3-pin(+5V-D-G) |
DEEPCOOL CF120 Plus 3 FANS x120mm PWM Fan , ARGB Dual Loop Lighting Zones, High Airflow and Low-Noise, 3-Pin (+5V-D-G) Addressable RGB LED Lighting – WHITE
| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|






| Capacity | 650VA |
| Dimension (mm) | 286 x 96 x 138 (D x W x H) |
| Weight (kg) | 4.3 |
| Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
| Frequency | 50Hz/60Hz (Auto-sensing) |
| Phase | Single + GND |
| Voltage Range | 220-240VAC |
| Battery Mode | 220-240VAC |
| Frequency | 50Hz ±1% (Battery mode) |
| Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
| Transfer Time | 2ms typical |
| Type | 12V/8.2AH x 1 |
| Backup Time | 8 - 20 mins depending on load |
| Recharge Time | 2-4 hours recover to 90% capacity |
| Interface | RS232, USB port, RJ45/RJ11 (Optional) |
| Display | LED/LCD Optional |
| Alarm | Batt. Mode, low battery, overload, fault, etc. |
| Short Circuit Protection | Yes (Line mode & battery mode) |
| Surge Protection | Yes |
| Alarm | Audible & Visual |
| Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
| Intelligent Battery | Prevent overcharging of battery |
| Management | Protect battery and prolong battery life |
| 1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |

WhatsApp us