R-MORPHEUS-WHAPA1
DEEPCOOL MORPHEUS GAMING CASE supports UP TO E-ATX motherboards , GPUs up to 480mm , Tempered Glass , 1x 420mm ARGB side fan – WHITE
DEEPCOOL MORPHEUS GAMING CASE supports UP TO E-ATX motherboards , GPUs up to 480mm , Tempered Glass , 1x 420mm ARGB side fan – WHITEsupports UP TO E-ATX motherboards , GPUs up to 480mm , Tempered Glass , 1x 420mm ARGB side fan – WHITE
$ 174
DEEPCOOL MORPHEUS ARGB WHITE CASE
MORPHEUS
Modularity has a new face, and it comes to us in the form of DeepCool’s internally reconfigurable ATX+ chassis: the MORPHEUS. With incomparable compatibility and a spacious layout, the MORPHEUS is the best option for the DIY modder or the casual PC enthusiast.
A NEW TAKE ON MODULARITY
If sticking to the same system layout for years sounds boring, the MORPHEUS is exactly what you are looking for. Easily switch between the classic single chamber configuration and the dual chamber layout with a simple switch of a few parts. Everything necessary to shift between the two configurations is included, as well as a vertical GPU mount.
AIRFLOW AT ANOTHER LEVEL
High airflow panels surround the MORPHEUS case from the front, right, top, bottom, rear, and even the top of the PSU shroud; there will be no shortage of airflow provided to the high-powered heat-generating components inside. High-flow mesh filters are included for the front, top, and bottom panels and will keep dust out.
EXTENSIVE COOLING CAPABILITY
Fan options are unparalleled, with the ability to mount thirteen 120mm or 140mm fans or go to the extreme and add up to six 200mm fans into the conversation. The highly modular fan rails make these configurations a reality.The MORPHEUS can also support up to three 420mm radiators simultaneously. 420mm radiators can be mounted to the front, top, bottom, and side of the motherboard tray.
Radiators
- Top:120/140/240/280/360/420mm
- Front:120/140/240/280/360/420mm
- Side:120/140/240/280/360/420mmBottom:120/140/240/280/360/420mm (Dual Chamber)
- Rear:120/140mm (Single Chamber)
Fans
- Top:3 x 120/3 x 140/2 x 180/2 x 200mm
- Front:3 x 120/3 x 140/2 x 180/2 x 200mm
- Side:3 x 120/3 x 140mm
- Bottom:3 x 120/3 x 140/2 x 180/2 x 200mm (Dual Chamber)
- PSU Shroud:3 x 120/3 x 140mm (Single Chamber)
- Rear:1 x 120/1 x 140mm (Single Chamber)
CPU Coolers
- 195mm (Single Chamber)
- 132mm (Dual Chamber)
A TRINITY OF FANS!
A set of highly convenient trinity fans come mounted inside the MORPHEUS: three beautifully bright 140mm ARGB fans are united into a single 420mm unit. The trinity of fans only require the wiring of a single set of PWM and ARGB cables, greatly reducing the amount of cable management.
MAXIMUM COMPATIBILITY
The ATX+ form factor of the MORPHEUS case guarantees compatibility with a large range of components. This ATX+ DeepCool case supports E-ATX motherboards while also having compatibility for GPUs up to 480mm in length, 195mm tall CPU coolers in the single chamber configuration, and multiple 420mm radiators.
DUAL REAL-TIME DIGITAL DISPLAY
Save precious space on your desktop by moving the monitoring of temperatures and usage of your CPU and GPU onto the built-in display that is included with the MORPHEUS case. A simple-to-install app and an open USB 2.0 header will get the dual display up and running.
A BEVY OF I/O PORTS
With four USB 3.0 ports, a Type-C port, and a hybrid audio port, there is no shortage of devices that can be accessed from the top front I/O panel. There is also an LED cycle button to control the built-in ARGB controller, an HDD activity LED, and a Power button to round out the front I/O.
BITS!
Add a bit of a personal touch with the fun rubber square bits! Included as a fun addition, the pixels can be used with majority of the mesh panels of the MORPHEUS case. Leave messages for others, add custom logos, or create your own 8-bit character!
Expert Specifications
Materials ; ABS+SPCC+Tempered Glass
Motherboard Support : Mini-ITX / M-ATX / ATX / E-ATX
Front I/O Ports
- USB 3.0 x 4
- Audio x 1
- Type-C x 1
3.5″ Drive Bays ; 2
2.5″ Drive Bays ; 2 + 1
Expansion Slots ; 9 Slots
Pre-Installed Fans ; Side:1 x 420mm ARGB
Fan Support
- Front: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
- Top: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
- Side: 3 x 120 / 3 x 140mm
- Bottom: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
- PSU Shrouded: 3 x 120 / 3 x 140mm
- Rear: 1 x 120 / 1 x 140mm
Radiator Support
- Front: 120/140/240/280/360/420mm
- Top: 120/140/240/280/360/420mm
- Side: 120/140/240/280/360/420mm
- Bottom: 120/140/240/280/360/420mm
- Rear: 120/140mm
CPU Cooler Height Limit ; 195/132mm
GPU Length Limit ; 480mm
Power Supply Type ; ATX PS2(maximum length: 180mm)
Product Dimensions ; 528 x 250 x 551 mm (L x W x H)
Weight
15.5KG
8
People watching this product now!
Description
Additional information
| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
SHIPPING AND DELIVERY
Our delivery charges are calculated based on the distance between our warehouse and your location We strive to provide the best possible delivery experience for our customers and are committed to delivering your products as quickly and efficiently as possible If you have any questions or concerns regarding our delivery services, please feel free to contact us Our customer service team is always available to assist you and provide information or support you may need
Related products
Cooler Master MasterCase H500P Mesh Black ARGB Case
$ 173
Cooler Master MasterCase H500P Mesh ARGBMCM-H500P-MGNN-S11 Black PC Case with Dual 200mm Fans for High-Volume Airflow, Builder-Focused Chassis Panels, Liquid Cooling Ready
DUAL 200MM ARGB FANS – Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling (includes an additional 140mm fan at the back) – fully compatible with RGB-certified motherboards (ASUS Aura, Gigabyte Fusion, MSI Mystic Light, and ASRock) for comprehensive ARGB lighting.
BUILDER FOCUSED – A DIY or case modding dream, the front mesh intake panel, transparent top exhaust panel, and both side panels can be easily taken off – perfect for creative people looking to personalise their PC.
TEMPERED GLASS SIDE PANEL – The easy-to-remove light-grey tinted side panel combined with minimalist CPU cut out cover, PSU shroud, and clean cable management covers with dedicated routing creates a minimalist frame in which to showcase the hardware inside. Supports E-ATX* (*12″ x 10.7″ will limit cable management features) , ATX, Micro-ATX, and Mini-ITX motherboards – features 2 additional PCI slots at the rear to better highlight graphics cards.
LIQUID COOLING READY – The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
ACCESSIBLE I/O PANEL – Features 2 x USB 3.2 (formerly USB 3.0) ports, 2 x USB 2.0 ports, 1 x 3.5mm audio jack, 1 x 3.5mm mic jack, ARGB Controller and 1 x 2-to-3 ARGB Splitter
Fully Mesh Front Panel
Dual 200 mm ARGB LED Fans
Cable Management & PSU Cover
Vertical GPU Support
360 mm Liquid Cooling Support
Tempered Glass Side Panel
ARGB Controller and 1-to-3 Splitter Cable Included
COOLER MASTER Riser Cable PCIE 3.0 X16 VER. 2
$ 26
Flex your Graphics Muscle
The Cooler Master Riser Cable PCIe 3.0 x16 Ver. 2 - 300mm comes revised for maximum flexibility and durability. High quality plastics grant increased cable flexibility and strength for the tightest PCI card installations, while the heavy-duty shielding prevents electromagnetic interference from degrading signal quality. A stainless steel PCI slot adds extra rigidity to the riser to support even the largest and heaviest graphics cards. The IPC4101D compliant PCB provides the best in class performance under high thermal loads and cable flex than any of the non-compliant competitor riser cables in the market.
Ultra Durable PCB
The IPC4101D compliant PCB provides the best in class performance under high thermal loads, cable flex, and moisture resistance than any of the non-compliant competitor riser cables in the market.
Heavy duty shielding
EMI shielded 28/30 AWG copper wires ensure minimal signal delay and electromagnetic interference-free operation.
Gold pin connections
Gold PCI pins allow maximum electrical conductivity with a rated 110g of insertion force per contact pair for high durability.
Protective ABS casing
UV resistant ABS casing protects cable connection points from rough handling.
Freely express yourself: Download the 3d printable files (.stl) and create your own customized design.
Stainless steel-reinforced PCI slot
Nickel-plated stainless steel PCI slot adds rigidity for superior card retention for even the heaviest PCI card installations.
Ultra-flexible cable sleeves
TPE cable sleeves allow for maximum flexibility and durability for the tightest cable routing jobs.
- Model Number
- MCA-U000C-KPCI30-300
- Units per package
- 1 piece per package
- Available Color(s)
- Black
- Compatibility
- PCI-E 3.0
- Certifications
- EMI, IPC4101D/21
- Materials
- PCBA, Copper Wire
- Insulation Materials
- PE, TPE
- Other Materials
- ABS, Stainless Steel, Nickel, Gold, Brass
- Connectors
- PCI-E x16 Male to PCI x16 90° Female
- Cable Length
- 300mm
- Contact Current Rating
- 1.1A per contact pin
- Operating Temperature
- -20° to +100° Celsius
- Weight
- 110g
- Warranty
- 1 year
- EAN Code
- 4719512101537
- UPC Code
- 884102073830
- Series
- Others
- Note
- This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation.
Document
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
Original price was: $ 8.$ 5Current price is: $ 5.
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
Mining 24 Pin TO CONNECT 2 Dual Power Supply
Original price was: $ 7.$ 6Current price is: $ 6.
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
Thermal Grizzly Hydronaut High Performance Thermal Paste – 1 GRAM
$ 10
Thermal Grizzly Hydronaut Thermal Paste 1 Gram Model TG-H-001-RS
Features:
Hydronaut can be used for overclocking due to it’s excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
suited for Overclocking
excellent thermal conductivity
no curing
silicone-free
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 11,8 W/mk
Thermal Resistance 0,0076 K/W
Electrical Conductivity 0 pS/m
Viscosity 140-190 Pas
Speific Weight 2,6g/cm3
Temperature -200 °C / +350 °C
Capacity 1,5ml / 3,9g – 3ml / 7,8g
Thermal Grizzly Hydronaut Thermal Paste 1.5 ml 3.9 GRAM
$ 16
Thermal Grizzly Hydronaut 1.5ml / 3.9g Thermal Paste Model TG-H-015-R
Features:
Hydronaut can be used for overclocking due to it’s excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
suited for Overclocking
excellent thermal conductivity
no curing
silicone-free
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 11,8 W/mk
Thermal Resistance 0,0076 K/W
Electrical Conductivity 0 pS/m
Viscosity 140-190 Pas
Speific Weight 2,6g/cm3
Temperature -200 °C / +350 °C
Capacity 1,5ml / 3,9g – 3ml / 7,8g
Thermal Grizzly Kryonaut Thermal Paste, 1 GRAM
Original price was: $ 11.$ 10Current price is: $ 10.
Thermal Grizzly Kryonaut Thermal Paste 1 Gram Model TG-K-001-RS / ZUWA-145
Features:
Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.
designed for Overclocking
excellent thermal conductivity
no curing
long-term durability
no electrical conductivity!!!
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 12,5 W/mk
Thermal Resistance 0,0032 K/W
Electrical Conductivity 0 pS/m
Viscosity 130-170 Pas
Specific Weight 3,7g/cm3
Temperature -250 °C / +350 °C
Capacity 1,5ml / 5,55 g 3ml / 11,1g
Thermal Grizzly Minus Pad 8 Thermal Pad, 120 × 20 × 0.5 mm, 2-Pack
Original price was: $ 16.$ 15Current price is: $ 15.
Thermal Grizzly Minus Pad 8 Thermal Pad 120x20mmx1mm Model TG-MP8-120-20-05-2R
Features:
The high performance thermal pads of the Thermal Grizzly Minus Pad series consist of a very elastic and flexible surface area with very high thermal conductivity, compensating for even the smallest of gaps between components. Available in a variety of different sizes and thicknesses.
High thermal conductivity
High compressibility
Electrical insulation
Specs:
Specifications minus pad 8: W/mK 8.0, temperature range: -100°C / +250°C
The minus pads 8 are available in the sizes of 30x30mm, 120x20mm, 100x100mm as well as in the thicknesses of 0,5mm, 1mm, 1,5mm, 2mm.