DeepCool 750 Watt Gold Non-Modular PSU
$ 94 Original price was: $ 94.$ 87Current price is: $ 87.
DeepCool 750 Watt Gold Non-Modular PSU
Total Connectors |
|
Cable Design |
Flat
|
Total Wattage |
750 W
|
Number of +12 V Rails |
1
|
Efficiency Rating |
80 PLUS Gold
|
Form Factor |
ATX
|
Total Connectors |
1x 20+4-Pin ATX Motherboard
2x 4+4-Pin EPS CPU 3x 6+2-Pin PCIe 6x 15-Pin SATA 3x 4-Pin Peripheral / Molex |
Cable Design |
Flat
|
PCIe Connector Distances |
19.7″ / 500 mm
|
SATA Connector Distances |
17.7″ / 450 mm
22.4″ / 570 mm 27.2″ / 690 mm |
Peripheral Connector Distances |
17.7″ / 450 mm
22.4″ / 570 mm 27.2″ / 690 mm |
ATX Connector Distance |
21.7″ / 550 mm
|
EPS Connector Distances |
24″ / 610 mm
|
Total Wattage |
750 W
|
Number of +12 V Rails |
1
|
Combined Power for +12 V |
750 W
|
Max Load for +12 V |
62.5 A
|
Combined Power for +3.3/+5 V |
110 W
|
Max Load for +3.3 V |
20 A
|
Max Load for +5 V |
20 A
|
Max Power for +5 Vsb |
15 W
|
Max Load for +5 Vsb |
3 A
|
Max Power for -12 V |
3.6 W
|
Max Load for -12 V |
0.3 A
|
AC Input Power |
100 to 240 VAC, 50 / 60 Hz at 10 A
|
Efficiency Rating |
80 PLUS Gold
|
Active Power Factor Correction |
No
|
Efficiency |
90% at 50% Load
|
Hold up Time |
16 ms at 75% Load
|
Power-Good Signal |
100 to 150 ms
|
Fan Size |
120 mm
|
Bearing Type |
Hypro
|
Operating Temperature |
32 to 104°F / 0 to 40°C
|
Form Factor |
ATX
|
Compliance |
ATX 12 V v2.4
|
Protection |
Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection, Under-Voltage Protection
|
Certifications |
TUV, CCC, CE, FCC, UKCA, EAC, BIS, RCM, CAN, ICES, ErP
|
Mean Time Between Failures (MTBF) |
100,000 Hours
|
Dimensions |
5.9 x 3.4 x 5.5″ / 150 x 86 x 140 mm
|
VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Memory | 4 GB |
Brand | ADATA |
Warranty | 3 Years Limited Warranty |
Minimum Order Quantity | 1 Nos |
Get your notebook or small form factor machine fully equipped with HyperX Impact DDR4 SODIMM and minimize system lag. Ready for AMD Ryzen and Intel XMP-ready in capacities up to 64GB, Plug N Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz¹, to support Intel and AMD’s latest CPU technologies. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run cool, quiet, and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage.
1.HyperX Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. HyperX Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.
WhatsApp us