VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|






LIAN LI LANCOOL 205 MESH C MID TOWER RGB WHITE CASE
$ 91 Original price was: $ 91.$ 88Current price is: $ 88.
LIAN-LI-205-WH
LIAN LI LANCOOL 205 MESH C MID TOWER RGB WHITE CASE
Lian Li Lancool 205 Mesh C Mid Tower RGB Case White Model G99.OE764CW.00
A case powerful, still stylish strong and compact, radiators friendly on top and front, ease of use with removable mounting brackets. LANCOOL 205, the standard case with tempered glass that fits with maximum of ATX motherboard. LANCOOL 205M, the smaller case that can fit a maximum of Micro-ATX motherboard. LANCOOL 205 Mesh is the case improves the airflow and added in 2 ARGB PWM 140mm fan and one ARGB PWM 120mm fan.
IMPROVED AIRFLOW
Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system with filtration for the dust.
EASY TO CHANGE, YOUR CALL
LANCOOL 205 provides swapable top and front fan brackets that are friendly to mount fans and radiator, while the LANCOOL 205 MESH provides 1 for the top.
SUPPORT ATX / M-ATX / Mini ITX
DIMENSIONS 205 mm (W) x 415 mm (D) x 485 mm (H)
MATERIAL
Side panel: Tempered Glass
Front panel: SPCC Mesh Panel
Main structure: SPCC 0.6mm
MOTHERBOARD SUPPORT ATX/M-ATX/Mini-ITX
PSU SUPPORT 165mm(Max)
INCLUDED FAN
Front: 2 x 140mm ARGB PWM Fan
Rear: 1 x 120mm ARGB PWM Fan
FAN SUPPORT
Top: 2 x 120/140mm
Front:2 x 140mm
Rear: 1 x 120mm
RADIATOR SUPPORT
Top:280mm
Front:280mm
DRIVE SUPPORT 4 x 2.5? SSD
or 2 x 2.5? SSD+ 2 x 3.5? HDD
GPU LENGTH CLEARANCE 350mm(Max)
CPU HEIGHT CLEARANCE 160mm(Max)
EXPANSION SLOT 7
I/O PORTS Power Button, LED Color Button, LED Mode Button,
USB 3.0 x 2,Audio, Microphone,
DUST FILTER 1 x Front
Removable mesh panel
1 x Bottom Removable Dust Filter
1 x Top Magnetic Dust Filter
Related products
1850W ATX Modular Mining PC Power Supply 6 GPU
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC




AMPCOM M.2 NVME SSD to PCIe 4.0 Adapter Card
About this item
- M.2 NVME (M Key) SSD to PCIe X16 adapter with aluminun case
- AMPCOM M.2 PCIE NVMe Adapter card converts M.2 (M Key) SSD to PCIe 3.0 x16 interface (32Gbps speed at Max). Supports PCIe 1.0, PCIe 2.0 and PCIe 3.0 motherboard.
- It comes with aluminum case and thermal compound pads which helps to Quick Heat-dissipation and boost the transmission speed
- Easy to installation and Plug&Paly, no driver required
- Package: 3 thermal compound pads, 1 PCI-E adapter, 1 screw driver
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
Kingston 960GB A400 SATA3 2.5″ SSD SA400S37/960G
Motherboard Biostar H81MHV3 LGA1150, H81, DDR3
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
Thermal Grizzly Minus Pad 8 Thermal Pad, 120 × 20 × 0.5 mm, 2-Pack
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
INPUT
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
OUTPUT
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
BATTERY
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
Real Panel
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
