ThermalTake Smart SE 530W cm 87+ PSU Modular Cable Management Power Supply , 87% Efficiency , Flat & Low Profile Modular Cable , Smart 140mm Cooling Fan , 160mm – Black
PSU 530W Modular 140mm Fan
$ 69
PSU 530W Modular 140mm Fan
The latest presentation from Thermaltake in the essence of mainstream systems – the SMART SE Series PSU, a performance series of power supply units (PSU) that incorporated various PSU high-tech components, leading technology and Eco-friendly credentials, ranged between 530 to 730W with semi-modular that will accommodate any mainstream build under any circumstance. It is ideal for users to build a home or office system for 24/7 stable demands.
Deliver up to 87% efficiency at 20-100% load under real world load conditions to cut down electric cost and promise lowest power losses. Saving the unnecessary waste of energy and environmental protection.
All low-profile flat modular cables that not only increased the airflow and made chassis thermal performance improved, but also allow for effortless cable routing.
Customizing concept of Smart SE 530/630/730W enables user to maximize available power and make set-up easy. It is a semi-modular power supply that offered cable selection for users while powering system at a healthy voltage.
High quality main capacitor produces supreme performance with low impedance characteristics. The stable operation works for longer time with excellent reliability to enhance the power supply performance.
Large 140mm cooling fan, built-in with intelligent temperature control device can automatically detect the power load for fan speed adjustment and maintain optimal mute performance.
P/N | SPS-530M |
---|---|
WATTS | 530W |
VENTILATEUR RGB | Non |
FORMAT | ATX |
TYPE | Intel ATX 12V 2.3 & SSI EPS 12V 2.92 |
MAX. OUTPUT CAPACITY | 530W |
PEAK OUTPUT CAPACITY | 630W |
COULOR | Black |
DIMENSION ( W / H / D ) | 150mm(W) x 86mm(H) x 160mm(L) |
PFC (POWER FACTOR CORRECTION) | Active PFC |
POWER GOOD SIGNAL | 100-500 msec |
HOLD UP TIME | 16msec (minimum) at 80% of full load at 230Vac input. |
INPUT CURRENT | 4.0A max. |
INPUT FREQUENCY RANGE | 47Hz – 63Hz |
INPUT VOLTAGE | 200VAC – 240VAC |
OPERATING TEMPERATURE | 0℃ to +35℃ |
OPERATING HUMIDITY | 20% to 90%,non-condensing |
STORAGE TEMPERATURE | -20 ℃ to +70 ℃ |
STORAGE HUMIDITY | 5% to 95%, non-condensing |
SYSTÈME DE REFROIDISSEMENT | 14cm Sleeve Fan: 1900RPM ± 10% |
EFFICIENCY | Deliver up to 87% efficiency |
MTBF | 100,000 hrs minimum |
SAFETY APPROVAL | CE, TUV, GOST |
PCI-E 6+2PIN | 6+2pin x 2 |
PROTECTION | OVP, OPP, SCP |
ThermalTake Smart SE 530W cm 87+ PSU Modular Cable Management Power Supply , 87% Efficiency , Flat & Low Profile Modular Cable , Smart 140mm Cooling Fan , 160mm – Black
PSU 530W Modular 140mm Fan
VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Socket : 1200
CPU SUPPORT | Support for 10th/ 11th Generation Intel Core i9/ i7/ i5/ i3 processors and Intel Pentium processors/ Intel Celeron processors in the LGA1200 package * Please refer to www.biostar.com.tw for CPU support list. |
MEMORY | Supports Dual Channel DDR4 3200/ 2933/ 2666/ 2400/ 2133/ 1866 2 x DDR4 DIMM Memory Slot, Max. Supports up to 64 GB Memory Each DIMM supports non-ECC 4/8/16/32GB DDR4 module * Please refer to www.biostar.com.tw for Memory support list. |
INTEGRATED VIDEO | By CPU model Supports DX12 Supports HDCP Supports HDMI 1.4 version |
STORAGE | -- Total supports 1 x M.2 socket and 4 x SATA III (6Gb/s) ports 4 x SATA III Connectors (6Gb/s) 1 x M.2 (M Key) Socket: Supports M.2 Type 2242/ 2260/ 2280 SSD module. Supports PCIe 3.0 x4 (32Gb/s) - NVMe/ AHCI SSD & SATA III (6Gb/s) SSD * When using SATA SSD module on M.2 slot (M2_PCIEG3_32G_SATA_1), the SATA_1 connector will be disabled. |
LAN | Intel I219V 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability |
AUDIO CODEC | ALC897 7.1 Channels, High Definition Audio |
USB | 4 x USB 3.2(Gen1) ports (2 on rear I/Os and 2 via internal headers) 8 x USB 2.0 ports (4 on rear I/Os and 4 via internal headers) |
EXPANSION SLOT | 1 x PCIe 3.0 x1 Slot 1 x PCIe 3.0/ 4.0 x16 Slot (x16 mode) * The PCIe 4.0 only depends on Rocket Lake CPUs. |
REAR I/O | 2 x WIFI Antenna Ports 1 x PS/2 Keyboard / Mouse 1 x HDMI Port 1 x VGA Port 2 x USB 3.2 (Gen1) Ports 4 x USB 2.0 Port 1 x LAN port 3 x Audio Jack |
INTERNAL I/O | 4 x SATA III Connectors (6Gb/s) 1 x M.2 (E Key) Socket : Supports 2230 type Wi-Fi & Bluetooth module and Intel CNVi 2 x USB 2.0 Header (each header supports 2 USB 2.0 ports) 1 x USB 3.2 (Gen1) Header (each header supports 2 USB 3.2 (Gen1) ports) 1 x 8-Pin Power Connector 1 x 24-Pin Power Connector 1 x CPU Fan Connector 1 x System Fan Connector 1 x Front Panel Header 1 x Front Audio Header 1 x Internal Stereo Speaker Header 1 x Clear CMOS Header 1 x COM Port Header * M.2 (E key) Wi-Fi card is not provided |
H/W MONITORING | CPU / System Temperature Monitoring CPU / System Fan Monitoring Smart / Manual CPU Fan Control System Voltage Monitoring |
DIMENSION | Micro ATX Form Factor Dimension: 20.8 cm x 23.6 cm ( W x L ) |
OS SUPPORT | Supports Windows 10(64bit) ※Biostar reserves the right to add or remove support for any OS with or without notice. |
BUNDLE SOFTWARE | BullGuard |
ACCESSORIES | 2 x SATA Cable 1 x I/O Shield 1 x DVD Driver 1 x Quick Guide 1 x WiFi accessories |
FEATURES | BIOS-Flasher |
Memory | 4 GB |
Brand | ADATA |
Warranty | 3 Years Limited Warranty |
Minimum Order Quantity | 1 Nos |
Get your notebook or small form factor machine fully equipped with HyperX Impact DDR4 SODIMM and minimize system lag. Ready for AMD Ryzen and Intel XMP-ready in capacities up to 64GB, Plug N Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz¹, to support Intel and AMD’s latest CPU technologies. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run cool, quiet, and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage.
1.HyperX Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. HyperX Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.
WhatsApp us