VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
TRANSCEND SSD 400S M.2 1TB PCIE NVME TS1TMTE400S
$ 106
TS1TMTE400S
TRANSCEND SSD 400S M.2 1TB PCIE NVME
Appearance |
|
Dimensions | Single-sided 42 mm x 22 mm x 2.23 mm (1.65″ x 0.87″ x 0.09″) |
---|---|
Weight | 5 g (0.18 oz) |
Type |
|
Interface |
|
Bus Interface |
|
Storage |
|
Flash Type |
|
Capacity |
|
Operating Environment |
|
Operating Temperature | 0°C (32°F) ~ 70°C (158°F) |
Operating Voltage |
|
Performance |
|
Sequential Read/Write (CrystalDiskMark) |
|
4K Random Read/Write (IOmeter) |
|
Terabytes Written (TBW) |
|
Mean Time Between Failures (MTBF) | 2,000,000 hour(s) |
Drive Writes Per Day (DWPD) | 0.21 (5 yrs) |
Note |
|
Related products
1850W ATX Modular Mining PC Power Supply 6 GPU
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC




AMPCOM M.2 NVME SSD to PCIe 4.0 Adapter Card
About this item
- M.2 NVME (M Key) SSD to PCIe X16 adapter with aluminun case
- AMPCOM M.2 PCIE NVMe Adapter card converts M.2 (M Key) SSD to PCIe 3.0 x16 interface (32Gbps speed at Max). Supports PCIe 1.0, PCIe 2.0 and PCIe 3.0 motherboard.
- It comes with aluminum case and thermal compound pads which helps to Quick Heat-dissipation and boost the transmission speed
- Easy to installation and Plug&Paly, no driver required
- Package: 3 thermal compound pads, 1 PCI-E adapter, 1 screw driver
BIOSTAR PCIe X1 USB 3.0 Crypto Mining Expansion Card
Kingston 960GB A400 SATA3 2.5″ SSD SA400S37/960G
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
RAM KINGSTON FURY 8GB 3200MHz DDR4 NOTEBOOK
HF432S20IB2/8
From the manufacturer


Powerful SODIMM Performance
Maximize your memory and get a boost to your gaming, multitasking, and rendering.
Intel XMP-Ready Profiles
Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules, reaching speeds up to 3200MHz..
Higher Performance with Low Power Consumption
Run your system cool and efficiently with Impact DDR4’s low 1.2V power draw.Get your notebook or small form factor machine fully equipped with HyperX Impact DDR4 SODIMM and minimize system lag. Ready for AMD Ryzen and Intel XMP-ready in capacities up to 64GB, Plug N Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz¹, to support Intel and AMD’s latest CPU technologies. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run cool, quiet, and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage.
- Powerful SODIMM Performance
- Plug N Play Automatic Overclocking Functionality
- Intel XMP-Ready Profiles
- Ready for AMD Ryzen
- Higher Performance with Low Power Consumption
- Slim form, sleek design
1.HyperX Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. HyperX Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
INPUT
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
OUTPUT
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
BATTERY
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
Real Panel
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
